1～9 item / All 9 items
Air Plasma Cutting Machine CUT Master Series
● The cutting capacity has increased by 20% due to a 20% increase in output current compared to conventional machines. ● Simple functions make operation easy. ● Weighing only 18.5 kg, it is easy to carry to the job site.
For anything related to construction machinery, agricultural machinery, automotive maintenance tools, machine repair, purchasing, and used sales, please feel free to contact Repair Shop Furukawa.
We will be uploading used machinery and products, so thank you for your support. We also have many other used items, so please feel free to inquire.
With the 'Kiri-Nuki Jizai' plasma, there are techniques that can be achieved! Safe and free cutting work with the sword (Espada) in hand.
The "APC-40" is an air plasma cutting machine that allows all cables to be completely stored in the main unit, with everything centralized on the front panel, achieving excellent operability and visibility. With the adoption of a rotary switch and monitoring lamp, it enables a solid ON/OFF operation of the power supply. It can be adjusted from 8 to 15A at an input voltage of 100V, and from 10 to 40A at 200V. The graphical scale design makes it easy to understand the set values. 【Features】 ■ Compatible with both 100V and 200V, suitable for any working environment ■ Rated duty cycle is a generous 60% (when used at 200V) ■ Lightweight and compact at 16kg ■ Pilot arc ■ Comes with a 1-year warranty for the main unit *For more details, please refer to the PDF document or feel free to contact us.
![[Example] Significant reduction in environmental impact and operability](https://image.www.ipros.com/public/product/image/827/2000294749/IPROS9199836160037790740.jpg?w=280&h=280)
We will introduce examples of solving issues and significantly reducing environmental impact through the introduction of Z-plasma.
We will introduce a case where the introduction of Z Plasma solved issues and significantly reduced environmental impact. At a certain public institution, drum cans were being manually cut using gas burners and air plasma, but they were struggling with the large generation of sparks and handling restrictions associated with gas burners. 【Case Overview】 ■Challenges - Manual cutting of drum cans using gas burners and air plasma - Gas burners were troubled by the large generation of sparks and handling restrictions - Issues with short circuits, NOx, and sparks ■Results - The introduction of Z Plasma significantly reduced sparks, smoke, and NOx - Work could be done without issues even when the torch was directly applied to the target object or when it was coated with paint - Safe and secure as it only uses water and electricity *Please feel free to contact us for more details.
Acquisition of ISO 9001 certification (Scope of registration: Design, manufacturing, and erection of steel bridges)! Let me introduce our headquarters factory.
We would like to introduce our headquarters factory, which is certified as an S-class factory by the Steel Frame Construction Industry Association. We began operations in May 1963 as a manufacturing facility for steel bridges, steel frames, steel towers, and other steel structures. In March 1998, we obtained ISO 9001 certification (registration scope: design, manufacturing, and erection of steel bridges). Our permitted business categories include civil engineering, construction, and steel structure construction. 【Equipment Owned (Partial)】 ■ NC primer stripping device ■ NC plasma cutting machine ■ NC gantry-type high-speed drill ■ NC laser cutting machine ■ Machine tools *For more details, please refer to the PDF materials or feel free to contact us.
![[Information] Nagaoka Factory Guide](https://image.www.ipros.com/public/product/image/a52/2000516871/IPROS12068505580400009403.png?w=280&h=280)
The overview of the branch, introduction of various cutting methods, and detailed information on quality control standards are provided.
This document introduces Fujita Metal Co., Ltd.'s "Nagaoka Factory." Established in June 1958 in Nagaoka City, this factory serves as the core of the Nagaoka branch, handling the cutting of medium-thick plates among various steel materials. Since its establishment, we have been working on the NC (Numerical Control) automation of plasma cutting machines and gas cutting machines to meet the needs of local users. [Contents (partial)] ■ Introduction to the Nagaoka branch ■ Overview of the Nagaoka branch ■ Introduction to various cutting methods ■ Quality control standards ■ Twister TFPL6014 (plasma cutting machine), etc. *For more details, please refer to the PDF document or feel free to contact us.
Air Plasma Cutting Machine Series
● Lightweight and compact at 13.5kg, making it easy to move on-site. ● Built-in compressor, eliminating the need for an air source. ● Stable cutting with inverter control. ● Fixed output at 10A, no adjustment needed.
Assist communication between the inputter and the operator to improve work response! Plasma cutting machine.
The "Bright Dual" is a plasma cutting machine that has achieved paperless operation through the adoption of new control software. You can check the cutting data without printing the work instructions. Furthermore, due to the built-in control panel, it can be installed in approximately 25% less space compared to our conventional machines. 【Features】 ■ Space-saving with improved accuracy ■ Achieves paperless operation ■ New notification feature ■ On-site filtering feature *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Metal and Non-Metal Cutting and Significant Environmental Improvement](https://image.www.ipros.com/public/product/image/101/2000294751/IPROS1337040014046843678.jpg?w=280&h=280)
Introducing a case where the introduction of Z plasma solved challenges and significantly improved the environment!
We will introduce a case where the introduction of Z Plasma solved challenges and significantly improved the environment. At a certain air conditioning construction site, processing work for various water, air, and gas penetration holes, as well as processing of support columns and gypsum board, was essential for duct and deck plate construction. [Case Overview] ■Challenges - Processing work for various water, air, and gas penetration holes, as well as processing of support columns and gypsum board, was essential for duct and deck plate construction. - Tasks such as cutting fire-resistant boards, cutting support columns, and drilling holes in deck plates were traditionally performed using gas burners or electric saws. However, gas usage requires qualifications and has restrictions, and it also generates a large amount of sparks and requires protective measures. ■Results - The introduction of Z Plasma eliminated the need for many devices and utilized the features of multifunctional equipment. - Environmental impact was significantly reduced, and it was possible to process both metal and non-metal materials like gypsum board, resulting in substantial effects. - Issues related to confidentiality when outsourcing, as well as the hassle of modifications and changes, along with the increase in costs, were resolved. *For more details, please feel free to contact us.
